YL Electrical Equipment (Tianijn) Co.,Ltd.

Note:

YEDU-2A (2-side printing one pass, two 36mm wide print heads) can print barcode, number, QR code and photos on partial card width area (no more than 36mm wide print area) on both sides of card surface, and it cannot realize full-width card print. If you need full-width card print, please turn to YEDU-1B or YEDU-2B (72mm wide print head).

The difference between YEDU-2A and YEDU-2B lies in the print head model and maximum print width. YEDU-2A is using two Japannese Konica 36mm print heads which can only print on maximum 36mm width area on both sides of card surface, and YEDU-2B is using two Japanese SEIKO 72mm print heads which can realize full-width printing on both sides of card surface.

Functional module configuration:

Card feeder #1(CR80 size)-RFID card encoder(optional)-Chinese magnetic encoder (optional)- Card feeder #2(CR80 or bigger)- Plasma treatment unit #1- DOD Black Printing unit #1 (max. 36mm wide Konica) - LED UV Solidification unit #1 -OCR inspection unit #1(optional) -Scratch labeling unit #1 (optional)-Card turn-over unit-Plasma treatment unit #2- DOD Black Printing unit #2 (max. 36mm wide Konica) - LED UV Solidification unit #2 -OCR inspection unit #2(optional)-Bad card Rejection unit- Scratch labeling unit #2 (optional) - Card Collection unit

Optional functional modules are described as below:

1. RFID Chip encoding unit (1-head model)

It can read UID from such RFID chips including Mifare S50, S70, Desfire MOA8, Ultralight, Plus, Ntag203, Ntag213, ICODE 2, FUDAN and KUNRUI chips. It can write data or change initial passwords in such RFID chips including Mifare S50, S70, Ultralight, Ntag203, Ntag213, ICODE 2, FUDAN and KUNRUI chips. Speed: 7000 card/h in reading mode or 2000-4000 cards/H in writing mode, if the data to be encoded is bigger in size, the writing speed is slower.

2. Magnetic card encoder unit (Chinese module) 

It canencode three tracks or any single or two tracks in magnetic stripe of various magnetic cards(excluding financial bank card) in a speedy and precise way, but the magnetic cards encoded by the Chinese module cannot fully meet the strict specification of ISO 7811 for high-end financial bank cards, Speed: around 8000 cards/h.   If you need encode the magnetic stripe of financial bank cards, we can add German magnetic card encoder in our personalization line.  

3. OCR inspection unit

It is designed for identifying or reading the number, barcode, QR code printed on card surface to compare with the database to check the correctness of DOD printing, speed: over 8000cards/h. Note: Two sets of OCR units shall be needed for YEDU-2 model line.       

4. Scratch labeling unit (cold labeling)

It is designed for applying or sticking the scratch-off label(s) onto the card surface after DOD printing. It can apply several labels (2, 3 or 4 ) on the card surface at the same time. speed: over 8000cards/h.  Note: Two sets of labeling units shall be needed if you need apply labels on both sides of the card.

Technical Parameters

1.     Speed: 10000 cards/h (print-only mode)

2.     Print head and Max. printing width: Konica 36mm black ink

3.     printing resolution: 360-720 DPI adjustable

4.     Max. Printing speed: 25 meters/min.

5.     Speed for Best printing quality: 20 meters/min.

6.     Compressed air: 6KG/CM2, 20L/min.

7.     Power supply: AC220V, 50/60HZ, 12KW

8.     LED UV Wave length and Power: 395NM, 400W.

9.     Control mode: Industrial computer + motion control system

10.   Net Weight: around 900-1700kg(as per different configuration)

11.   Machine size: around L(4600-11000mm)×W650mm×H1600 mm (as per different configuration)